Email | Print

Drum Rotation & Power Options

Cutter Rotation (Down, Up, Rotary)

Down

Gas (HP) + (Drive HP)

11

Propane Option

n/a

Electric (HP) + (Drive HP)

7.5

Air or Hydraulic

n/a

Cutter Drum / Tool Choices

Carbide Pin (Bit) Cutters

n/a

Diamond Shavers, Groovers

Tungsten Carbide Milling Picks

Carbide Scrapers, Millers

4N1 Carbide

300 Hour Carbide

n/a

Carbide Flails

Steel Flails (Beam or Stars)

Prep-It Strips

n/a

Wire Brush

Standard Specifications

Removal width / pass (inches - mm)

up to 10" (254mm)

Removal width / pass (inches - mm) Swivel Engaged

n/a

Removal depth / pass (inches - mm)

up to 1/4" (6.35mm)

Hourly Production Rate (LF) (approx.)

2250

Height (inches - mm)

44" (1117.6mm)

Width (inches - mm)

19" (482.6mm)

Length (inches - mm)

38" (965.2mm)

Weight (lbs) (without drum, attachments)

240

Variable depth adjustment

Engage Cam Lever

Pressure Controls

n/a

Weight Plates

n/a

Vacuum Port with Containment Shroud

Cutter Shaft OD

9/16" (14.2875mm)

Bushed Drums

Quantity Wheels

4

Feathering Caster

n/a

Remote Power Shut-Off

Ergonomic (Vibration Dampening) Handlebar

Side-Loading Cutter Drums

Drive System (Direct or # of belts)

1

Bearings Sealed (1) or Serviceable (2)

2

Manual, Self-Propel or Ride-On

Manual

Available Equipment Options

Edger

Optional Water Control

Optional Water Tank

Parking Brake - Standard vs. Optional

Optional

SPS10 Drum Assemblies Email | Print

Best for Any and all surface-prep, groove-inlay or removal on asphalt or concrete substrates (optional edger). Used by Professional contractors that want to earn more, removing faster, safer with better surface finishes. Exclusive features of this machine: With over 10 styles of cutter removal tools for every type of finish, the SPS10 standard and deluxe models feature heavy duty drive components and construction with 10 optional user convenience features for cost-effective faster removal with best performance.

Email | Print

Email | Print

"The SMITH SPS10.20 Surface Preparator with Strip-it Cutters performs very well. We especially liked the finish that was left behind."
Jason B. Hilite



"We were so pleased with our SPS10 diamond grooving drum that we added the FS350 self propelled diamond groover to our fleet and doubled our productivity."
Jerry Willamette, Surfaces Concrete, Inc.



"Easy to move, easy to use. Living in a big city, storage and mobilization is a problem. That's why we own the SMITH SPS10."
Nathan, Vantage Contractors




"We made a ton of money this year using our SMITH EZOFF SPS10 to groove-inlay tape into asphalt and concrete. In Sept 2011, our Grooving Crew grooved-inlayed and installed 28,850 SF (4”), 19,440 SF (6"), 6,750 SF (12") 3,980 SF (24"), 847(Turn Arrows), 24 (ONLY), 189 (Bike Symbols), 14 (RXR Symbols) pavement marking tape."
Mike O., Streetwise

"I highly recommend the high quality SMITH SPS10 Scarifier and SMITH gas powered dust collector since it performs as advertised. The SPS10 levels cement surfaces and any existing surfaces or floor coverings. The SMITH ultra-premium Flail-it cutters offers an excellent surface-prep profile."
L. Bruelman



"Douglas County Department of Transportation uses their SMITH SPS10  equipment daily to remove striping, Brad says it works "fantastic" and does everything it is suppose to do."
Brad with Douglas County Department of Transportation

CLICK HERE FOR HANDLEBAR ADJUSTMENT INSTRUCTIONS

Email | Print