SMITH Cutters
 |
 |
 |
 |
| For
Smith FS200 and SPS10 models, use our patent-pending Carbide Prep-It™ Strips
when cleaning stubborn materials on asphalt or concrete floors when you
do not want to damage the substrate. |
Revolutionary
4N1™ patent-pending design replaces 4 (3” OD Carbide Flail
Cutters) and removes 4 ways...
(Erases, Cleans, Scrapes or Mills). |
| |
 |
|
 |
|
5 or 6 edge
for thick film coatings
or asphalt milling for all eradicators
and scarifiers. |
5
pt to 16 pt for aggressive removal
and ultra-premium long life for use
on all eradicators and scarifiers. |
| |
 |
|
 |
|
4, 7 or 12
sharp edge for removal
on concrete or in asphalt for many
eradicators and scarifiers. |
8 sided for
crack routing, joint cleaning, plunge-cut or grooving on all popular
routers and road machines. |
| |
 |
|
 |
|
| Sharp
or Blunt tooth with our without
locking sleeves fit most popular skid
steer cold planers for micro surfacing
or coating removal. |
8-15
tooth styles made from high quality spring steel. Beam for gentle removal
or Stars for deeper substrate penetration.
Lasts
1/25th as long and removes 1/5th as fast as Smith’s ultra-premium
carbide cutters. |
| |
 |
|
 |
16,
24 and 48 pin designed for thick film
removal like thermoplastic markings. Also for smoothing down high spots
on asphalt.
Fits all popular machines like the LNX8, X3, PM ERASER, Linax, TLR7 and
others. |
Use in an
upcut motion to
remove curing compounds,
oil and grease deposits while
protecting the substrate. |
| |
 |
|
 |
SMITH diamond segments are manufactured with 40% concentration
ultra-premium, (950+ GE grade) diamonds. Our unique matrix bonding system
assures optimum performance and long life.
Our premium blades are designed for cost-effective wet or dry cutting of
asphalt, concrete, brick, block, and stone. |
Carbide chunk abrasive Discs & Drums are
designed for epoxy, mastic, paint, and urethane removal on stone, tile,
porcelain, masonry & concrete. Each disc is double sided for EXTRA
long life. |
 |
 |
Drums, Shafts, Spacers, Bushings & more... |
| For use on most popular Air Scabblers.
The 5 point carbide is the most common tool to produce a general, rough
surface finish. 9 point for a fine finish. |
We have parts for your machines...
High quality SMITH OEM parts are proven to hold up to your toughest removal
jobs.
We make chrome plated tool steel shafts, wear-resistent bushings, hardened
spacers, bushed drums and more. |
|
