Bookmark and Share
Remove Airfield Markings
SMITH Catalog
SMITH University
Join SMITH Xtreme Team
Workzone Warriors


Archive for the ‘SMITH Equipment’ Category

Surface-Prep Innovations

Wednesday, May 24th, 2017
From automatic depth controllers for consistent surface-prep profiles and HEPA Dust collectors, to front-wheel jacks for easy FS351 loading, SMITH surface-prep innovations help to make your hard removal work faster and easier. 

 Sidewalk Trip Abatement Innovation

Grinding down trip hazards on sidewalks is hard work. The new AES depth control actuator assures accurate cut depths for whatever you are grinding. Adding this accessory will produce consistent finishes and increase cutter life. When you attach the SMITH Sulky driver to your SPS10 with AES, the chore of removal is now easier. Of course, unlike this municipality that elected not to use a dust collector, SMITH always recommends using a HEPA vacuum to contain all airborne dust during removal.


Pavement Preservation Innovation

Getting consistent surface finishes use to be an art. Now anyone can achieve the right SP finish with the AES depth controller. With a simple push of the button, you will automatically remove in the “cutter impact zone” for perfect finishes and longer cutter life. Ask your SMITH Representative about pre-ordering an AES with your new SMITH LNX8. Don’t forget to attach a SMITH Sulky Power Driver to your walk-behinds for fast, easy, and effective removal.

Transport Innovation

Moving the FS351 on and off your work trucks used to be a chore. We developed a handy front wheel jack to make the transport of your SMITH FS351 faster and easier.
If you own an FS351 self-propelled scarifier, planer or shaver, consider ordering this transport innovation.
If you have an idea for an innovation or need assistance with your operation, please share them with us here.

Airmark Thermoplastic Removal at Airports

Thursday, May 18th, 2017

The X-Series pavement marking erasers were use to remove Airmark flame applied thermoplastic pavement markings on the tarmac at the Fort Lauderdale International Airport during an airfield marking symposium.

The Ennis-Flint AirMark marterial is a durable preformed thermoplastic pavement marking material for airside use at Part 139 and GA Airports.

Typically, scrapers and torches are a laborious method to remove this type of gummy, difficult to remove material. Water blasters available at airports are unable to remove Airmark on asphalt without damaging the asphalt surface.  Common drum-style scarifiers and planer machines are ineffective and create deep surface grooves. 

The SMITH X-series Erasers are combination rotating scrapers that lift up and move the materials to the side and not into the pavements like drum-style grinders.  Although the removal took 4X longer than traditional paint markings, the materials were removed without having to hand scrape or flame torch the surface.  

The equipment consisted of an X3 rotary eraser with MV5500 HEPA vacuum outfitted on a Bobcat Toolcat supplied by Burnie Carstens with Bobcat of Broward. A sit down LNX8 Eraser with automatic depth controls driven by an SR25 Sulky.  

The airport appreciated that the final surface was preserved and appeared as if no markings were ever applied.  The surface was left in a profiled SP5 roughness similar to the outlying areas of the untouched tarmac. The SP5 profile is ideal for re-applying preformed thermoplastic markings on this type of asphalt surface. The following day, a new Airmark pavement marking will be applied by Ennis-Flint.

For more information, please contact your authorized SMITH Representative. 

FLL Airfield Runway Marking Removal Demo

Wednesday, May 10th, 2017

FLL Airfield Markings Removal SymposiumJoin SMITH at the FLL Airfield Marking Symposium, May 17, 2017.  At the Sightline workshop, SMITH will demonstrate the X-Series Rotary ErasersTo confirm your attendance, please here, or to receive an agenda, please click here.

SMITH X-Series Dry Rotary Erasers Demo

prep tools

SMITH will be removing airfield markings with the SMITH X3 and LNX8 Dry Rotary Erasers

You will witness how markings can easily be removed without grooving, micro-cracking, or water. 

X-Series Erasers are used when new markings must be immediately applied over the same location or in a new one.

While you are in town, we invite airfield operations personel to visit our factory located 17 minutes north of the airport in Pompano Beach.

© 2017 SMITH Surface-Prep Solutions - 1610 S. Dixie Highway, Pompano Beach, FL 33060-8913
Toll Free: 1-800-653-9311 | Ph: 954-941-9744 | Fax: 954-545-0348
Specifications and data are subject to change without notice.